Previous Page      Next Page     Section-01   Page-42

SPECIFICATIONS, Treatment Ratio Two 2 oz. treats on quart of lube oil. Recommended for use after every four (4) oil changes, and may be used as often as every oil change.

Handling and Storage
Blend using conventional equipment and methods for blending finished fluids. Do not overheat over 140oF (60oC) for prolonged periods to avoid possible release of alkyl mercaptans and / or hydrogen sulfide.

• Maximum Storage Temperatures 140oF (60oC) 1,300 Viscosity 9cSt)

* Recommended Transfer Temperature 155oF (68oC) 770 Viscosity (cSt)
Caution must be exercised when heating this product. Low pressure steam (preferably 50 PSIG / 3.4 ATM) is recommended. If heated, product temperature should be constantly monitored and product should be agitated to avoid localized temperatures above 155oF (68oC)

 

 

 

 

 

 

Racor Lube Oil Treatment is a fluorocarbon oil additive which contains an advanced, highly effective polymer lubricant. It provides a superior thin coating to protect precision engine parts and does not contain PTFE or Teflon®, which have been known to fall from suspension and clog precision engine components.

Racor Lube Oil Treatment may be used with diesel and gasoline engines and is compatible with all motor oils including synthetics.

Reduces noise and heating in diesel and gasoline engines

Anti-corrosion formula

Compatible with all motor oils including synthetics

Increases mileage, engine life and performance

Reduces friction on cold start up

Prevents premature wear on piston rings and cylinder walls. reducing harmful exhaust emissions

Previous Page      Next Page     Section-01   Page-42